Access the menu for Printhead replacementCaution• When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal parts of thePrinthead become hot during printing, and there is a risk of burns from touching these parts.Important• Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead for re-placement.Note• Prepare a new Ink Tank when ink levels are low.1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-lect the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Set./Adj. Menu is displayed.3 Press ▲ or ▼ to select Maintenance, and then press the OK button.4 Press ▲ or ▼ to select Replace P.head, and then press the OK button.Ink begins being drawn in. When it finishes, instructions are displayed on the Display Screen.It takes about two minutes to complete.Replace the Printhead1 Open the Top Cover.Instructions are now shown on the Display Screen regarding Print-head replacement.Important• During Printhead replacement, do not move the Carriage from the position indicated. If you accidentallymove the Carriage, you will hear a warning tone, and Printhead replacement is no longer possible.If you move the Carriage by mistake, close the Top Cover. The Carriage will be moved to the position asindicated.Replacing the Printhead iPF685User's GuideMaintenance and Consumables Printheads602Downloaded from ManualsPrinter.com Manuals
