When specifying an IPv6 IP address1 Start imagePROGRAF Device Setup Utility from thestart menu.2 In the Device Name list displayed, select the printer to configure.3 Choose Protocol Settings from the Printer menu.4 Select the IPv6 tab.5 In IPv6, select On.6 When there is an IPv6-compatible router in the network environment, select On in Stateless Address.Additionally, when there is an DHCPv6-compatible server in the network environment, select On in DHCPv6.Note• When there is no IPv6-compatible router or DHCPv6-compatible server, select On in Manual and enter theIPv6 Address and Prefix Length.7 Click Set.8 Click OK after the Confirmation message is displayed.9 Exit imagePROGRAF Device Setup Utility.Configuring the IP Address Using imagePROGRAF Device Setup Utility iPF685User's GuideNetwork Setting Device Setup Utility (Windows)510Downloaded from ManualsPrinter.com Manuals
