Item Details Default SettingUse RARP Activate this setting to use RARP for configuring the IP address. OffEnable DNS DynamicUpdateActivate this setting to perform DNS server registration automatically. OffUse Zeroconf Func-tionActivate this setting to use Bonjour. OnIP Address Specify the printer's IP address. 0.0.0.0Subnet Mask Specify the printer's subnet mask. 0.0.0.0Gateway Address Specify the printer's default gateway. 0.0.0.0LPD Printing Activate this setting to use LDP Printing. OnIPP Printing Activate this setting to use IPP Printing. OnIPP Printer URI Specify the URI of the printer used for IPP printing using up to 252 charac-ters.printerRAW Printing Activate this setting to use Raw Printing. OnRAW Mode Bi-direc-tionActivate this setting to use Raw mode bidirectional communication. OffFTP Printing Activate this setting to use FTP Printing. OnUse Discovery Activate this setting to use SLP Discovery function. OnScope Enter the SLP search range. defaultSMTP Server Address Specify the SMTP server's IP address.You can also specify the SMTP server domain name, if desired.0.0.0.0Primary DNS ServerAddressSpecify the IP address of the primary DNS server. 0.0.0.0Secondary DNS Serv-er AddressSpecify the IP address of the secondary DNS server. 0.0.0.0DNS Host Name Specify the printer host name, up to 63 characters (1–63 characters). Use sin-gle-byte letters, numbers, and - (hyphens). Do not use numbers or - for thefirst character or - for the last character.NB-18GBipxxxxxxDNS Domain Name Specify the printer domain name, up to 63 characters. Use single-byte letters,numbers, - (hyphens), and . (periods). Do not use numbers, -, or . for the firstcharacter, or - or . for the last character.blankMulticast DNS Serv-ice NameSpecify the printer's Multicast DNS service name. (1–63 characters)This name will be displayed when Bonjour functions are used.Canon iPFxxxx(xxxxxx)6 Click OK to display the Network page.Note• If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that supports suchprotocol running in the network.• If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this method isused first. If you cannot obtain the IP address, the address specified in IP Address is used.• It takes up to two minutes to determine whether DHCP, BOOTP, or RARP are available. We recommend clearing checkboxes of options you will not use.• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers andDNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain Name,respectively.iPF685 Configuring the Printer's TCP/IP Network Settings With RemoteUIUser's GuideNetwork Setting Initial Settings501Downloaded from ManualsPrinter.com Manuals
