Important• For the Web browser, use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later. ForMac OS X, Safari 1.32 or later or 2.03 or later also is supported.• This cannot be used connected via a proxy server. In environments where a proxy server is used, add the printer's IPaddress to Exceptions (addresses accessed without a proxy server) in the web browser proxy server settings. (Set-tings may vary depending on the network environment.)• Enable JavaScript and cookies in the web browser.• If you access RemoteUI with the printer name instead of its IP address, make sure the DNS settings are correctlyconfigured.• Depending on the network environment, you may not be able to start RemoteUI.• Confirm whether System Setup > Use RemoteUI is set to On on the Control Panel of the printer.Note• RemoteUI also offers many other features. You can display the ink levels, check error messages and other status infor-mation, and cancel print jobs.• By factory default, the English screen is displayed. To change the display language, select the desired language underLanguage before logging on in administrator mode.• If you login in Administrator Mode, you can configure to use the Jumbo Frame function in the Network page. However,this function might not be able to be used depending on the network environment.iPF685 Using RemoteUIUser's GuideNetwork Setting Using RemoteUI495Downloaded from ManualsPrinter.com Manuals
