Specifying menu itemsMenu items can be set as follows.1 Press ▲ or ▼ to select the desired setting, and then press the OK but-ton.After two seconds, the display reverts to the upper level menu.Note• If a confirmation message is displayed regarding the setting you entered, follow the on-screen instructions.• If you have changed the Interface Setup menu settings, a message confirming whether to register the set-tings is displayed if you press Back button or Menu button. Follow the instructions shown on the screen.Specifying numerical valuesFollow these steps to enter numbers. In this example, network settings items are entered.1 Press the ◀ or ▶ button to move to the next field for input.2 Press the ▲ or ▼ button to enter the value.Note• Hold down ▲ or ▼ to increase or decrease the value continuously.3 Repeat steps 1 and 2 to complete the settings, and then press the OK button.Note• If a confirmation message is displayed regarding the setting you entered, follow the on-screen instructions.• If you have changed the Interface Setup menu settings, a message confirming whether to register the set-tings is displayed if you press Back button or Menu button. Follow the instructions shown on the screen.Executing menu commandsMenu commands can be executed as follows.1 Press ▲ or ▼ to select the action to execute, and then press the OK button.The menu command is now executed.iPF685 Menu OperationsUser's GuideControl Panel Printer Menu451Downloaded from ManualsPrinter.com Manuals
