2 When using 24-inch or A1 (portrait) rolls, pull out theAdjustable Stopper (a). This completes the procedurefor switching to Extended position A.Once the printing has finished, use the following procedure to return to the regular position.1 Lower the Support Rod to the position shown (a) to re-turn to the regular position. If the Adjustable Stopper (b)is extended, retract it.2 Return to the regular position.• Switching to Extended position B (ST-27 only)Switch the stacker to Extended position B as follows.iPF685 Using the Output StackerUser's GuideHandling and Use of Paper Output Stacker403Downloaded from ManualsPrinter.com Manuals
