1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-lect the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Paper Menu is displayed.3 Press ▲ or ▼ to select Eject Paper, and then press the OK button.4 Press ▲ or ▼ to select Yes, and then press the OK button.The roll is now rewound and ejected.Caution• If you have selected ManageRemainRoll > On in theControl Panel menu, a barcode is printed on the lead-ing edge of the roll.Do not remove the roll before the barcode is printed.You will be unable to keep track of the amount of rollpaper left. (See "Keeping Track of the Amount of Roll Paper Left.") ➔ P.3855 Positioning your hands as shown, open the Roll Cover.iPF685 Removing the Roll from the PrinterUser's GuideHandling and Use of Paper Handling rolls381Downloaded from ManualsPrinter.com Manuals
