• Paper SizeYou can select the size of the print media.Note• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.• Print CenteredSelect this feature to print the image in the center of a cut sheet or to print left and right margins evenly from theedges of roll paper.Note• This feature is useful when you print the document enlarged or reduced with Scaling as well. When an image isscaled, it is always enlarged or reduced in reference to a starting point in the upper left corner of the page. If theimage is reduced, the bottom and right margins are enlarged and the top and left margins remain unchanged. Atthat point, you can set all margins evenly with this feature.• No Spaces at Top or BottomYou can set the printer to print without any empty area when the print data contains empty area at the top or bot-tom. Since the printer does not feed paper over the empty area, you can save paper.Note• Available only if rolls are selected in Paper Source.• Rotate PageSelect the method for rotating page.The following settings are available for rotating page.Setting DetailsRotate Right 90 Degrees Rotates the portrait page right 90 degrees and print in landscape orientation. When the rota-ted page can fit in the width of roll paper, the page is rotated automatically, and when it cannot fit in the width of roll paper, the page is not rotated.*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then the imageis enlarged or reduced after rotating to fit the width of the roll paper.Rotate Left 90 Degrees Rotates the portrait page left 90 degrees and print in landscape orientation. When the rotatedpage can fit in the width of roll paper, the page is rotated automatically, and when it can not fitin the width of roll paper, the page is not rotated.*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then the imageis enlarged or reduced after rotating to fit the width of the roll paper.Rotate 180 degrees Allows you to rotate the image 180 degrees from the vertical to the right.Note• Available only if rolls are selected in Paper Source.• Output Method ButtonClick the button to open the Output Method dialog box.In this dialog box, you can specify the object output method.iPF685 Output Settings PanelUser's GuideMac OS Software Color imageRUNNER Enlargement Copy355Downloaded from ManualsPrinter.com Manuals
