Setting DetailsColorSync ➔ P.313 Enables color matching by using the ColorSync function of OS X. Select this if you want toperform soft proofing using ColorSync before printing.Note• You need to set each correction on the printer driver.• ColorSync needs to be selected in the Color Matching panel of the driver in order to select ColorSync.• Matching MethodYou can select a matching method to suit the print job.• GammaYou can adjust the gradation of intermediate tones in an image. 2.2 is normally selected. If you want a softer im-pression than 2.2, select 1.8.Note• You can select only after Driver Matching Mode has been selected in Matching Mode.• Input ProfileSelect the input profile.Note• You can select only after ICC Matching Mode has been selected in Matching Mode.• Printer ProfileSelect the printer profile.Note• You can select only after ICC Matching Mode has been selected in Matching Mode.• Soft ProofWhen you place a checkmark here, ColorSync applies to the preview area.Note• You can select only after ColorSync has been selected in Matching Mode.Matching iPF685User's GuideMac OS Software Preview310Downloaded from ManualsPrinter.com Manuals
