2. Removing the Blade1) Remove the developing assembly from the copier.2) Remove the two screws q, and remove the developing assembly cover w.Figure 4-3373) Place a newspaper on the floor or a desk, and pour out the toner from the developingassembly.4) Remove the two screws e, and remove the blade r together with the mount.Figure 4-338The blade must be mounted with high accuracy. Do not remove it on its own in thefield. Rather, remove it together with its mount.CHAPTER 4 IMAGE FORMATION SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-43q qwe r eNote:
