CHAPTER 11 TROUBLESHOOTINGCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 11-353 Orientation of the Feeding RollerWhen installing the feeding roller q to the pick-up assembly, be sure that the gearw on the feeding roller is at the rear of the copier.Figure 11-2394 Adjusting the Pressure of the Separation RollerIf double feeding or pick-up failure occurs during pick-up, adjust the position of thepressure spring of the separation roller:q If double feeding occurs, move the spring toward A.w If pick-up failure occurs, move the spring toward B.Figure 11-240wq (front of copier)qwerABq Feeding rollerw Separation rollere Locking leverr Pressure spring
