C. Image Formation System1 Orientation of the Scanning LampInstall the scanning lamp so that the boss at the center (lamp q) faces in thedirection of the arrow (mirror mount reverse direction), and the longer side is positionedso that the logo mark is at the front.Figure 11-226Do not touch the lamp assembly.2 Position of the Blank Shutter SolenoidAdjust the position of the solenoid to that A is 7.7 ±0.5 mm on both sides when thesolenoid is moved in the direction of activation. When taking measurements, be carefulnot to force the shutter with calipers or the like.After making adjustments, check to make sure that the solenoid moves smoothly.Figure 11-227Figure 11-228CHAPTER 11 TROUBLESHOOTINGCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 11-29qMirror mount reverse directionNote:A
