J. DC Power Supply PCB1. Removing the DC Power Supply PCB1) Remove the three screws q, and disconnect the six connectors w; then, remove themotor driver 1 PCB e together with its mount.Figure 7-4272) Disconnect all connectors from the DC power supply PCB.3) Remove the four screws r, and remove the DC power supply PCB t.Figure 7-428CHAPTER 7 CONTROLS AND EXTERNALSCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 7-25wwqew qr rt