4. Adjusting the Position of the Blank Shutter SolenoidAdjust the position of the solenoid so that section A in the figure is 7.7 ±0.5 mm onboth sides when its plunger is moved in the direction of activation. (When takingmeasurements, take care not to force the shutter with slide calipers.)After making adjustments, check to make sure that the plunger of the solenoidmoves smoothly.Figure 4-315Figure 4-3164-32CHAPTER 4 IMAGE FORMATION SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)A