B. Pick-Up/Feeding Operation1. MechanismWhen the copier’s COPY START key is pressed, the deck pick-up clutch (CL2) turnson to rotate the deck pick-up roller. The deck pick-up roller leaves the paper when thedeck pick-up roller release solenoid (SL1) turns on after feeding the paper.The feeding roller and the separation roller serve to make sure that no more than onesheet of paper is fed to the feeding path; after leaving both rollers, the paper is movedto the inside of the copier by the vertical path roller.Figure 8-402CHAPTER 8 PAPER DECK PEDESTALCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-7Deck verticalpath rollerPick-up rollerM1 : Pedestal motorCL2 : Deck pick-up clutchCL3 : Deck vertical path roller drive clutchCopy paper Separation rollerLifterM1CL2CL3PedestalcontrollerPCBSL1J109-1 PEDMDJ110-B4 CL3D*J110-A2 DVRPDJ110-B14 DEPRL*J110-B2 CL2D*PS3FeedingrollerSL1 : Deck pick-up roller release solenoidPS3 : Deck vertical path roller paper sensor
