11-42CHAPTER 11 TROUBLESHOOTINGCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)3) Start [4], and select No. 403 using the keypad.• The indicator indicates ‘403’.4) Press the OK key.• The indicator indicates ‘NIP’.• Paper will be picked up from the multifeeder and delivered, enablingmeasurements as in Figure 11-251.Reference:Delivery stops after discharging the paper halfway; it will automatically resumeabout 10 sec to fully discharge the paper.5) Measure the nip.3 Position of the Fixing Assembly Paper GuideThe paper guide is positioned by the paper guide mount, and you need not adjust itsposition when installing the paper guide.Do not loosen the screw on the paper guide plate; otherwise, you will have to adjustthe position of the paper guide. If you should have loosened it for some reason, besure to put the fixing assembly base back to its original position.4 Position of the Cleaning Belt SolenoidInstall the cleaning belt solenoid so that the solenoid arm w butts against a whenthe plunger q of the solenoid is pushed by a finger.Figure 11-252Note:w qa
