5. Removing the Blank Shutter Motor1) Remove the blank exposure lamp assembly.2) Remove the blank exposure assembly upper plate. (See 2. “Removing the BlankExposure Lamp.”)3) Remove the two screws q, and disconnect the connector w; then, remove the blankshutter motor e by moving it in the direction of the arrow.Figure 4-3176. Routing the Blank Shutter CableFigure 4-318CHAPTER 4 IMAGE FORMATION SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 4-33qweqSlide shutterWindtwiceWindtwice