D. Detecting Paper in the Deck1. Identifying the Size of PaperYou must set the switch (SWUD1) on the deck size switch PCB to suit the size ofpaper set inside the paper deck.When you set the switch, the paper size signal (SIZE1 and SIZE2) sent to thepedestal controller PCB changes to ‘1’ or ‘0’.Based on the combination of these paper size signals, the pedestal controller PCBidentifies the size of the paper inside the paper deck as follows:* The configuration of SWUD1 represents when the switch is viewed from the front.Table 8-401CHAPTER 8 PAPER DECK PEDESTALCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-11Paper size*B5A4LTRSIZE1101SIZE21101 2 31 2 31 2 3
