CHAPTER 5 PICK-UP/FEEDING SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 5-537. Adjusting the Pressure of the Separation RollerIf double feeding or pick-up failure occurs during pick-up, change the position of thepressure spring of the separation roller.q If double feeding occurs, hook the spring on the side of A.w If pick-up failure occurs, hook the spring on the side of B.Figure 5-7168. Positioning the Pick-Up Assembly Pick-Up Roller Releasing Solenoid (SL1,SL2)Install the solenoid so that the pick-up roller arm q shown in Figure 5-717 buttsagainst the upper stay w when the plunger of the solenoid is pushed in.Figure 5-717qwButtedqwerABq Feeding rollerw Separation rollere Locking leverr Pressure spring
