3. Removing the Magnetic Seal (developing cylinder)1) Remove the developing assembly from the copier.2) Remove the bladeThe blade must be mounted with high accuracy. Do not remove it on its own in thefield. Rather, remove it together with its mount.3) Remove the screw q, and remove the fromt cover w.Figure 4-3394) Remove the screw e, and remove the electrode positioning plate r.Figure 4-3404-44CHAPTER 4 IMAGE FORMATION SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)Note:qwer