C. Copyboard Cover1. Replacing the Copyboard Cover SheetThe copyboard cover sheet is attached to the copyboard cover by means of double-sided tape, allowing you to remove it by simply pulling on its corners.Be sure to press the entire surface of the sheet after attachment.D. Fans1. Removing the Scanner Cooling Fan1) Remove the rear cover.2) Disconnect the connector q.3) Free the harness w from the harness retainer.4) Remove the four screws e, and remove the scanner cooling fan r.Figure 7-4112. Removing the Exhaust Fan1) Remove the drum unit.2) Remove the left cover and the inside left cover.3) Remove the screw q, and disconnect the connector w; then, put the connectorinside the copier.Figure 7-412CHAPTER 7 CONTROLS AND EXTERNALSCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 7-15q e r ee ewqw
