4) Remove the two screws r, and remove the thermal fuse t.Figure 4-306B. Blank Exposure Lamp Assembly1. Removing the Blank Exposure Lamp Assembly1) Remove the inside left cover.2) Remove the developing assembly and drum unit.3) Disconnect the two connectors q.4) Remove the three screws w, and remove the harness retainer e.Figure 4-3074-28CHAPTER 4 IMAGE FORMATION SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)trewq