7-6 Sending Faxes Chapter 7Manual Sending Via the HandsetManual sending via the handset allows you to talk to the other party before sending adocument. This method is useful if the other party must manually activate their faxmachine to receive a fax.Follow this procedure to send a document using manual sending via the handset:3 Press Start/Copy to begin scanning forsending, or if you used speed dialling, wait afew seconds for the FAX to begin scanningautomatically.• If you do not want the FAX to beginscanning automatically after a fewseconds, disable the TIME OUT setting(1 p. 14-6).• To cancel sending once dialling hasstarted, press Stop then T (1 p. 7-8).• If the number you are calling is busy, theFAX redials the number automaticallyafter a few minutes (1 p. 7-9).Note• You can register up to 20 different sending operations for memory sending.• The document is automatically deleted from memory after sending. This occurs evenif an error prevents complete transmission of the document.NoteFor this mode, you need to connect the optional handset or a telephone to your FAX(1 p. 2-6).1 Make sure you have connected the optionalhandset or a telephone to the FAX (1 p. 2-6).2 Load the document, face down in the ADF(1 p. 4-3).• To adjust the resolution and contrast,see pp. 7-2, 7-3.3 Press Hook.• You can also lift the handset instead ofpressing Hook.DOCUMENT READYMEMORY USED 0%Ex:(Currently used memory)(Standby to scan)TEL=
