8-5Receiving FaxesChapter 8Receiving FaxesReceiving Both Faxes and Telephone CallsAutomatically: Fax/Tel ModeSet this mode if you only have one telephone line for fax and telephone use and wantyour FAX to automatically switch between fax and voice calls.Setting Fax/Tel ModeFollow this procedure to set the receive mode to FAX/TEL AUTO SW(Fax/Tel Mode):NoteFor this mode, you need to connect the optional handset or a telephone to your FAX(1 p. 2-6).1 Open the one-touch speed dial panel.2 Press Data Registration.3 Press Set.4 Use ▼ or ▲ to select RX SETTINGS.5 Press Set.6 Use ▼ or ▲ to select RX MODE.7 Press Set.8 Use ▼ or ▲ to select FAX/TEL AUTO SW.9 Press Set.• To set the options for FAX/TEL AUTOSW (Fax/Tel Mode), see the followingpages.10 Press Stop to return to standby mode.11 Confirm that FaxTel is displayed in the LCD.• If FaxTel is not displayed, press ReceiveMode to select Fax/Tel Mode. After afew seconds, the LCD returns to standbymode.DATA REGSTRATIONUSER SETTINGSRX SETTINGSECM RXRX MODEFAX ONLY MODEEx:FAX/TEL AUTO SWRING START TIME15:00 FaxTelEx:15:00 FaxTelEx:
