14-6 Summary of Settings Chapter 14TX (Transmission) SETTINGS MenuFor details on accessing the settings below, see p. 14-3.The selectable settings and the default settings vary depending on the country where you havepurchased the FAX. The values shown here are average values.Setting Description Sub-SettingsECM TX Enables/disables Error Correction Mode (ECM) duringtransmission.ONOFFMID PAUSE SET Selects the length of a pause entered within a fax/telephone number with the Redial/Pause button.2 SEC(1 to 15)AUTO REDIAL Enables/disables automatic redialling if the other party’sline is busy on the first attempt (1 p. 7-9).ONOFFREDIAL TIMES Selects the number of redial attempts. 2 TIMES(1 to 10)REDIAL INTERVAL Selects the time interval between redial attempts. 2 MIN.(2 to 99)TIME OUT Enables/disables automatic scanning of documents afterthe fax number is entered.ON: Scanning begins automatically five seconds afterentering the fax number (10 seconds if sending to multiplefax numbers).OFF: Scanning does not start automatically. (You need topress Start/Copy to begin scanning.)ONOFF
