14-4 Summary of Settings Chapter 14USER SETTINGS MenuFor details on accessing the settings below, see p. 14-3.The selectable settings and the default settings vary depending on the country where you havepurchased the FAX. The values shown here are average values.Setting Description Sub-SettingsDATE & TIME Sets the current date and time (1 p. 3-6). UNIT TELEPHONE # Enters the fax/telephone number you want to appear at thetop of each fax page you send (1 p. 3-6).UNIT NAME Enters the name or company name you want to appear atthe top of each fax page you send (1 p. 3-6).TX TERMINAL ID Enables/disables printing of the sender information(1 p. 3-5).ONOFFTTI POSITION Selects whether the sender information is positionedinside or outside the image area (1 p. 3-5).OUTSIDE IMAGEINSIDE IMAGETELEPHONE # MARK Selects the prefix for the unit number (1 p. 3-5). FAXTELSCAN CONTRAST Selects the scanning contrast (1 p. 7-3). STANDARDDARKERLIGHTEROFFHOOK ALARM Enables/disables the off hook alarm that alerts you thatthe handset is not seated properly in its cradle.ONOFFVOLUME CONTROL Sets the volume of the FAX sounds. CALLING VOLUME Selects the ring volume when the FAX detects a voicecall.1/2/3KEYPAD VOLUME Selects the keypad touch beep volume. 0 (off)/1/2/3ALARM VOLUME Selects the error alarm volume. 0 (off)/1/2/3LINE MONITOR VOL Selects the line monitor volume (sound during dialling). 0 (off)/1/2/3RX CALL LEVEL Selects the ring type for incoming calls. HIGHSTANDARDTEL LINE TYPE Selects the telephone line type setting for your FAX(1 p. 3-8).TOUCH TONEROTARY PULSER-KEY SETTING Enables dialling through a switchboard.If you select PBX, you can select additional sub-settings(1 p. 3-9).PSTNPBX
