9-7Special FeaturesChapter 9Special FeaturesSending a Document Stored in MemoryFollow this procedure to send a document received in memory:1 Open the one-touch speed dial panel.2 Press Memory Reference.3 Use N or M to select RESEND DOCUMENT.4 Press Set.5 Use N or M to select the transaction number(TX/RX NO.) of the document you want tosend.• If you are unsure of the transactionnumber (TX/RX NO.), print the DOC.MEMORY LIST (1 p. 9-5).• A “#” before the transaction number(TX/RX NO.) indicates that thatdocument is being sent or printed at thatmoment, and can therefore not beselected.• Use O or P to display details of thetransaction (e.g. destination).6 Press Set.7 Enter up to 125 fax numbers you want to sendto using any of the following methods:❏ One-touch speed dialling:Press the one-touch speed diallingbutton(s) you want.❏ Coded speed dialling:Press Coded Dial, then use the numericbuttons to enter the two-digit code youwant. Repeat for other codes.• Be sure to press Coded Dial beforeeach code.DOC. MEMORY LISTRESEND DOCUMENTTX/RX NO. 0_001Ex:TX/RX NO. #5_003Ex:SELECT LOCATIONSTEL=TEL=905 795 1111Ex:A01Ex:TEL=03 3758 2111Ex:
