14-5Summary of SettingsChapter 14Summary of SettingsREPORT SETTINGS MenuFor details on accessing the settings below, see p. 14-3.The selectable settings and the default settings vary depending on the country where you havepurchased the FAX. The values shown here are average values.Setting Description Sub-SettingsTX REPORT Enables/disables automatic printing of a TX(transmission) REPORT (1 p. 11-4).PRINT ERROR ONLY: Prints a report only when atransmission error occurs.OUTPUT YES: Prints a report every time you send adocument.OUTPUT NO: No report is printed.PRINT ERROR ONLYOUTPUT YESOUTPUT NOPRINT WITH IMAGE If you select PRINT ERROR ONLY or OUTPUT YESabove, this setting enables/disables printing of the firstpage of the fax under the report.ONOFFRX REPORT Enables/disables automatic printing of an RX (reception)REPORT (1 p. 11-5).OUTPUT NO: No report is printed.PRINT ERROR ONLY: Prints a report only when areception error occurs.OUTPUT YES: Prints a report every time you receive adocument.OUTPUT NOPRINT ERROR ONLYOUTPUT YESACTIVITY REPORT Enables/disables automatic printing of an ACTIVITYREPORT after every 20 transactions (1 p. 11-3).AUTO PRINT ONAUTO PRINT OFF
