8© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520CFIRMWARE UPDATING8 - 178.1.2 Imaging Acceleration Board ROM (GE-1170)Important:• The file system of USB media should be formatted in the FAT or FAT32 format. Be carefulsince the devices formatted in NTFS format will not be able to be operated. The file systemcan be confirmed on the properties in applications such as Explorer of Windows.• The firmware version of the Imaging Acceleration Board ROM differs depending on theversion of the system firmware.Therefore confirm in advance that the version is the correct one before updating the ImagingAcceleration Board ROM.[A] Update procedure(1) Connect the USB media to the PC and write the model specific folder in which the data file isstored.Store the update program loader (mentusb2.o) in the root directory, and store the model specificupdate program (dlFirmWare_2820C_3530C) and the data file for updating in the model specificfolder.(2) Press the [ON/OFF] button on the control panel to shut down the equipment.(3) Connect the USB media to the USB port on the right upper cover.Fig. 8-10Note:Updating cannot be performed with multiple USB media connected at the same time.USB mediaUSB port
