e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reservedPREVENTIVE MAINTENANCE (PM)5 - 45.2.4 Counter ClearingThe counter indicating “current number of prints and driving time” used for the PM display function isreset by entering “0” in it or clearing it in the PM support mode.Note:Even if “0” is entered in the PM management setting value of the setting mode (08), thecorresponding counter for the PM display is not reset. Be sure to clear the counter in the PMsupport mode when the maintenance is finished.The reset condition of each counter is as follows:• 08-252: Current value of PM sheet counter [process unit (K)]• 08-376: Current value of PM driving counter [process unit (K)]When the current value of “CLEANER/DRUM/CHARGER (K)” on the main screen or “DRUM (K)” onthe sub-screen in the PM support mode is cleared, the counter is reset.• 08-6196: Current value of PM sheet counter [process unit (Y)]• 08-6197: Current value of PM driving counter [process unit (Y)]When the current value of “CLEANER/DRUM/CHARGER (Y)” on the main screen or “DRUM (Y)” onthe sub-screen in the PM support mode is cleared, the counter is reset.• 08-5564: Current value of PM sheet counter [process unit (M)]• 08-5565: Current value of PM driving counter [process unit (M)]When the current value of “CLEANER/DRUM/CHARGER (M)” on the main screen or “DRUM (M)”on the sub-screen in the PM support mode is cleared, the counter is reset.• 08-5566: Current value of PM sheet counter [process unit (C)]• 08-5567: Current value of PM driving counter [process unit (C)]When the current value of “CLEANER/DRUM/CHARGER (C)” on the main screen or “DRUM (C)” onthe sub-screen in the PM support mode is cleared, the counter is reset.• 08-5568: Current value of PM sheet counter [developer material (K)]• 08-5569: Current value of PM driving counter [developer material (K)]When the current value of “DEVELOPMENT UNIT” on the main screen or “BLACK DEVELOPER(K)” on the sub-screen in the PM support mode is cleared, the counter is reset.• 08-5570: Current value of PM sheet counter [developer material (Y)]• 08-5571: Current value of PM driving counter [developer material (Y)]When the current value of “DEVELOPMENT UNIT” on the main screen or “YELLOW DEVELOPER(Y)” on the sub-screen in the PM support mode is cleared, the counter is reset.• 08-5572: Current value of PM sheet counter [developer material (M)]• 08-5573: Current value of PM driving counter [developer material (M)]When the current value of “DEVELOPMENT UNIT (M)” on the main screen or “MAGENTADEVELOPER (M)” on the sub-screen in the PM support mode is cleared, the counter is reset.• 08-5574: Current value of PM sheet counter [developer material (C)]• 08-5575: Current value of PM driving counter [developer material (C)]When the current value of “DEVELOPMENT UNIT” on the main screen or “CYAN DEVELOPER (C)”on the sub-screen in the PM support mode is cleared, the counter is reset.• 08-5576: Current value of PM sheet counter [parts other than the PM parts of the process unit]• 08-5577: Current value of PM driving counter [parts other than the PM parts of the process unit]When the current value of “2nd TRANSFER” on the main screen or “2nd TRANSFER ROLLER” onthe sub screen in the PM support mode is cleared, the counter is reset.
