| 
3© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520CADJUSTMENT3 - 413.2.14 Text/Photo reproduction level adjustmentText/Photo reproduction level at the Full color mode, Auto color mode and Gray scale mode can beadjusted.Text/Photo reproduction level adjustment can be switched to “Photo oriented 1”, “Photo oriented 2”,“Text oriented 1” or “Text oriented 2” in the following codes.Notes:• The text reproduction level is lower when the mode is switched from the default value to thePhoto oriented 1 or Photo oriented 2. (The text reproduction level in Photo oriented 2 is lowerthan that in Photo oriented 1.)• Changing the setting value from default value to the Text oriented 1 or Text oriented 2 causesimage noise in the printed photo image with few lines per inch. (Photo oriented 2 causes moreimage noise than Photo oriented 1.)The procedure is the same as that of P.3-31 "3.2.2 Density adjustment".3.2.15 Black reproduction switching at the Twin color copy modeBlack reproduction can be switched at the Twin color (Black/Red) copy mode.Note:The boundary between Red and Black may not be smooth when the setting value is “1”.The procedure is the same as that of P.3-31 "3.2.2 Density adjustment".Mode Mode Item to be adjusted ContentsText/Photo User custom1725 7841 Text/Photoreproduction leveladjustment0: Default1: Photo oriented 2 (The printed image reproductionlevel higher than that of the Photo oriented 1)2: Photo oriented 1 (The printed image reproductionlevel higher than that of the Default)3: Equivalent to the Default4: Text oriented 1 (The text reproduction level higherthan that of the Default)5: Text oriented 2 (The text reproduction level higherthan that of the Text oriented 1)Mode Code Item to be adjusted RemarksTwin color copy mode(Black/Red)1761 Black reproductionswitching0: Default1: Black reproduction oriented |
