Toshiba e-STUDIO2020C Service Handbook

Also see for e-STUDIO2020C: User manual

Contents

e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reservedBACKUP FUNCTION4 - 10[B] Restoring procedure(1) Shut down the equipment.(2) Connect the USB media to the USB port on the right upper cover.Fig. 4-7Note:Restoring cannot be performed with multiple USB media connected at the same time.(3) Turn the power ON while pressing the [5] and [9] buttons simultaneously.A screen for selecting items to restore is displayed. Select the number (any of “2”, “4” and “6”) fordata you want to restore. Press the [Start] button.Fig. 4-8Notes:• It may take some time for the next screen to appear after you key in the number for the item.• The screen above is not displayed if the data cloning function is disabled. In this case, ask theuser (machine administrator) to enable the data cloning function on the TopAccess menu, orset “0 (Accepted)” in 08-9889.• To clear the selection, press the [CLEAR] or [FUNCTION CLEAR] button.Number Restore Item2: User Data Restore Restoring up User data4: Setting Restore Restoring up Setting item6: SRAM Data Restore Restoring up SRAM dataUSB mediaUSB port