1© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520CSPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES1 - 31.1.2 Copy[ 1 ] Copy specificationsDimensions of the equipment W 699 x D 742 x H 759 (mm)* When the tilt angle of the control panel is 52 degrees.Storage capacity Max. 1000 sheets or until the memory is fullOriginal glass Original scanningsystemFlat surface scanning system(the left rear corner used as guide to place originals)Original type Sheets, books and 3-dimensional objectsOriginal size Max. A3/LDReversingAutomaticDocumentFeeder(optional)Original scanningsystemFixed scanning system by feeding the original(the center used as guide to place originals)Original type Sheets (carbon, bounded or stapled originals cannot be accepted)Original size A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO,LD, LG, LT, LT-R, ST-R, COMPUTEROriginal paper weight Single-sided copy: 35-157g/m 2 (9.3 lb. Bond - 58 lb. Cover)Double-sided copy: 50-157 g/m 2 (13.3 lb. Bond - 58 lb. Cover)Original capacity Max. 100 sheets (80 g/m2) (Stack height 16 mm)EliminatedportionBlack copy Leading edges: 3.0 ± 2.0 mm, Trailing edges: 3.0 ± 2.0 mm,Side edges: 2.0 ± 2.0 mmColor copy Leading edges: 5.0 ± 2.0 mm, Trailing edges: 3.0 ± 2.0 mm,Side edges: 2.0 ± 2.0 mmMultiple copying Up to 999 copies: Key in set numbers52°WDH
