8© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520CFIRMWARE UPDATING8 - 11(8) Press the [ON/OFF] button to shut down the equipment, and then remove the USB media.(9) Perform the initialization of the updating data.• Press the [ON/OFF] button while simultaneously holding down the [0] and [8] buttons.• Key in “947”, and then press the [START] button.• Press the [INITIALIZE] button.M00 Other error Other errorScanner update ErrorError number Error message Error contentS01 Time out(When the download is requested)Communication timeout(When the download is requested)S02 Time out(When the download is written)Communication timeout(When the download is written)S03 Time out(When the download is finished)Communication timeout(When the download is finished)S05 Deletion error(When the download is written)Deletion error(When the download is written)S06 Writing error(When the download is written)Writing error(When the download is written)S08 Reception status code abnormality(When the download is requested)Reception status code abnormality(When the download is requested)S09 Reception status code abnormality(When the download is written)Reception status code abnormality(When the download is written)S10 Reception status code abnormality(When the download is finished)Reception status code abnormality(When the download is finished)S00 Other error Other errorEngine update ErrorError number Error message Error content
