Toshiba e-STUDIO2020C Service Handbook

Also see for e-STUDIO2020C: User manual

Contents

4© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520CBACKUP FUNCTION4 - 74.1.5 Cloning procedure[A] Backup procedure(1) Shut down the equipment.(2) Connect the USB media to the USB port on the right upper cover.Fig. 4-2Note:Backing up cannot be performed with multiple USB media connected at the same time.(3) Turn the power ON while pressing the [5] and [9] buttons simultaneously.A screen for selecting items to back up is displayed. Select the number (any of “1”, “3” and “5”)for data you want to back up. Press the [Start] button.Fig. 4-3Notes:• It may take some time for the next screen to appear after you key in the number for the item.• The screen above is not displayed if the data cloning function is disabled. In this case, ask theuser (machine administrator) to enable the data cloning function on the TopAccess menu, orset “0 (Accepted)” in 08-9889.• To clear the selection, press the [CLEAR] or [FUNCTION CLEAR] button.Number Backup Item1: User Data Back Up Backing up User data3: Setting Back Up Backing up Setting item5: SRAM Data Back Up Backing up SRAM dataUSB mediaUSB port