| 
3© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520CADJUSTMENT3 - 373.2.8 Setting range correctionThe values of the background peak/text peak in the range correction at the Black Mode can beswitched to “varied” or “fixed” in the following codes.If they are fixed, the range correction is performed with standard values.The values of the background peak affects the reproduction of the background density, and the valuesof the text peak affects that of the text density.Make a test copy and compare the image obtained with the current settings; if necessary, makeadjustment.The procedure is the same as that of P.3-31 "3.2.2 Density adjustment".3.2.9 Adjustment of smudged/faint textThe smudge/faint text at a Black Mode can be set at the following codes.Make a test copy and compare the image obtained with the current settings; if necessary, makeadjustment.Note:Remember the image specifications and life span of the replacing parts may not meet thestandard when the setting value is changed from the default value.The procedure is the same as that of P.3-31 "3.2.2 Density adjustment".OriginalmodeOriginal modeItem to be adjusted RemarksText/Photo Text PrintedImage Photo MapUserCustomGrayScaleFullcolor7767 7768 7769 7770 7771 7777 --- Automatic density mode 0: Backgroundpeak / fixed1: Backgroundpeak / varied7772 7773 7774 7775 7776 7778 --- Manual density modeACSblackmode7667 7668 --- --- --- --- --- Automatic density mode7669 7670 --- --- --- --- --- Manual density modeBlack 7283 7284 --- --- --- 7236 7295 Automatic density mode7286 7287 --- --- --- 7237 7296 Manual density modeColor modeOriginal mode Item to beadjusted RemarksText/Photo Text UsercustomBlack 648 649 925 Adjustment ofsmudged/ faint textWhen the value decreases, the fainttext is improved. When the valueincreases, the smudged text isimproved.Acceptable values: 0 to 4(Default: 2)ACSmonochrome7102 7103 --- |
