7© 2008 - 2011 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520CREPLACEMENT OF PC BOARDS/HDD7 - 21[F] Reset user’s setting items and restore data/informationAsk the user (machine administrator) to reset the user’s setting items and to restore data or information.Refer to the following for the reset and restore:* When the SSL is enabled, perform the setting of the following items again with “Create self-certificate” of TopAccess.Country NameState or Province NameLocality NameOrganization NameOrganizational Unit NameCommon NameEmail Address* When wireless LAN is used, perform the setting again on the LCD panel. (only when security with acertificate is used) Also, upload the following certificate file with “Install Certificate for Wireless LAN”of TopAccess.CA certificateUser certificate[G] Reset “FUNCTION LIST FOR MAINTENANCE”(1) Print out the “FUNCTION LIST FOR MAINTENANCE” list after the formatting. For how to print itout, refer to [B]Print out “FUNCTION LIST FOR MAINTENANCE”.(2) While pressing [1] and [3] simultaneously, turn the power ON. (Function Mode)(3) Compare the lists which were printed before and after the formatting to check the setting itemshaving the different setting values. Set the value which was set before the formatting.(4) Turn the power OFF.[H] Reset “FUNCTION” listReset the fax function by referring to the “function list” that was printed out in P.7-20 "[C] Print out“FUNCTION” list".(1) Press the [USER FUNCTIONS] button.(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.Note:Explain the user (machine administrator) about the next operation and ask him/her to enter his/her password.(3) Press the [FAX] button and then the [TERMINAL ID] button to set each item.(4) Press the [INITIAL SETUP] button to set each item.Items to reset/restore MethodPrinter driver Upload them in the “Administrator” menu of TopAccess.F-code information, Template registeringinformation, Address book dataRestore them in the “Administrator” menu of TopAccessDepartment management data Import them in the “Administrator” menu of TopAccess.Image data in the Electronic Filing Upload them in the “e-Filing” of TopAccess.
