| 
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reservedSELF-DIAGNOSTIC MODE2 - 942.6.5 CounterNote:In this equipment, a toner image is formed on the transfer belt prior to a paper feeding.When the feeding retry occurs and the transport timing is delayed, the toner image on thetransfer belt is cleaned off without the 2nd transfer since the paper cannot be reached for the 2ndtransfer process.After that, the toner image formation is retried while the paper is waited.In this case, the toner for this image formation is consumed wastefully since the toner image onthe transfer belt is already cleaned off, even though the printing is normally completed.Therefore, note that the excessive toner will be consumed consequently when the upper limitvalue of feeding retry counter is set larger or set as “0” (no limit).The toner is also consumed wastefully when the paper misfeeding occurs. Replace the roller atearlier timing if the paper misfeedings have occurred frequently.Setting mode (08)Code Classification Items FunctionDefaultablevalue>RAM Contents Procedure251 MaintenanceSetting value of PM sheetcounter / KALL(black)Refer tocontent<8 digits>M e-STUDIO2020C:40000e-STUDIO2330C:46000e-STUDIO2820C /2830C:56000e-STUDIO3520C /3530C / 4520C:70000[Unit. page]1252 MaintenanceCurrent value of PM drivingcounter Display/0 clearing /KALL(black)0<8 digits>M Counts up when theregistration sensor isON.1344 Counter Count setting of tab paper(PM)ALL 1<0-1>M 0: Counted as 11: Counted as 21346 Counter Count setting of large-sized paper (PM)ALL 1<0-1>M 0: Counted as 11: Counted as 21347 Counter Definition setting of largesized paper (PM)ALL 1<0-1>M 0: A3/LD1: A3/LD/B4/LG/FOLIO/COMP1348 Counter Count setting of thick paper(PM)ALL 1<0-1>M 0: Counted as 11: Counted as 21349 Counter Count setting of OHP film(PM)ALL 1<0-1>M 0: Counted as 11: Counted as 21352 Counter Count setting of large-sized paper (Fee chargingsystem counter)ALL JPN: 0OTHER:1<0-2>M 0: Counted as 11: Counted as 22: Counted as 1(Mechanical counteris double counter)1353 Counter Definition setting of largesized paper (Fee chargingsystem counter)ALL 0<0-1>M 0: A3/LD1: A3/LD/B4/LG/FOLIO/COMP/8k1375 MaintenanceSetting value of PM drivingcounter display/0 clearing /KALL(black)170000<8 digits>M Time accumulatingcounter1376 MaintenanceCurrent value of PM drivingcounter / KALL(black)0<8 digits>M Counts the drum drivingtime.1 |
