e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reservedPREVENTIVE MAINTENANCE (PM)5 - 8Notes:1. “—” is always displayed at the drive counts section for the reversing automatic documentfeeder (RADF) and feed unit.2. “—” is displayed at the numeric section for the paper source which is not installed since thepaper source is different depending on the structure of options.3. The number of output pages printed only in the full color mode is given in the pm output pagessection.2. Sub screenFig. 5-4Displaying of the sub unit (parts) nameBack to the main screenMoving to the clear screen to clear the selected unit (parts) countersDisplaying of the present number of print / develop pages“*” is displayed next to the present number when the number of print / develop pages hasexceeded its PM standard number.Displaying of the standard number of print / develop pages to replace the sub unit (parts)Displaying of the present drive counts“*” is displayed next to the present number when the number of drive counts has exceeded itsPM standard number.Displaying of the standard number of drive counts to replace the sub unit (parts)Displaying of the number of print / develop pages and drive counts and previous replacementdate for a chosen sub unit2 3814 5 6 712345678
