| 
e-STUDIO2020C/2330C/2820C/2830C/3520C/3530C/4520C © 2008 - 2011 TOSHIBA TEC CORPORATION All rights reservedADJUSTMENT3 - 483.3.3 Color balance adjustmentThe color balance is adjusted by adjusting the density of each color. The adjustment is performed byselecting its density area from the following: low density, medium density and high density.Notes:• Be sure that this adjustment be made after performing P.3-44 "3.3.1 Automatic gammaadjustment".• Changing the adjustment setting influences the adjacent density area slightly.E.g.: When the value of the medium density is larger, the adjacent areas in the low densityand high density range will become slightly darker.The procedure is the same as that of P.3-46 "3.3.2 Gamma balance adjustment (Black Mode)".The color from the 1st to the 7th stage (low density), from the 8th to the 11th stage (medium density)and from the 12th to the 13th stage (high density) in “Patch chart for gamma adjustment ([71] [FAX])”output in P.3-44 "3.3.1 Automatic gamma adjustment" can be used as a guide for the range of thedensity area influenced by the adjustment with the printer driver and the change of the adjustmentvalue (low density, medium density, high density (Refer to P.3-47 "Fig. 3-23").Color PS PCL XPS Density RemarksSmooth Detail Smooth Detail Smooth DetailYellow 8050-0 8054-0 8058-0 8062-0 8042-0 8046-0 Low The larger thevalue is, the darkerthe color to beadjusted becomes.Acceptablevalues: 0 to 255(Default: 128)8050-1 8054-1 8058-1 8062-1 8042-1 8046-1 Medium8050-2 8054-2 8058-2 8062-2 8042-2 8046-2 HighMagenta 8051-0 8055-0 8059-0 8063-0 8043-0 8047-0 Low8051-1 8055-1 8059-1 8063-1 8043-1 8047-1 Medium8051-2 8055-2 8059-2 8063-2 8043-2 8047-2 HighCyan 8052-0 8056-0 8060-0 8064-0 8044-0 8048-0 Low8052-1 8056-1 8060-1 8064-1 8044-1 8048-1 Medium8052-2 8056-2 8060-2 8064-2 8044-2 8048-2 HighBlack 8053-0 8057-0 8061-0 8065-0 8045-0 8049-0 Low8053-1 8057-1 8061-1 8065-1 8045-1 8049-1 Medium8053-2 8057-2 8061-2 8065-2 8045-2 8049-2 High |
