4 - FLIGHT PLANS78 190-00356-00 Rev GActive Flight Plan ShortcutsShortcutsA number of shortcuts are available to save timewhen using the active flight plan page. These shortcutsspeed the process of removing approaches, departures,and arrivals, and aid in selecting a specific flight planleg for navigation guidance.On the preceding page, options to removeapproaches, departures and arrivals were introduced.This process may also be completed using the CLRkey, as described below and illustrated at left.To remove an approach, departure, or arrivalusing the CLR key:1. With the active flight plan page displayed, pressthe small right knob to activate the cursor.2. Turn the large right knob to highlight thetitle for the approach, departure or arrival youwish to delete. Titles will appear in light bluedirectly above the procedure’s waypoints.3. Press CLR to display a confirmation window.4. With “Yes?” highlighted, press ENT to removethe selected procedure.This same process may also be used to removeindividual waypoints from the active flight plan.To remove a waypoint using the CLR key:1. With the active flight plan page displayed, pressthe small right knob to activate the cursor.2. Turn the large right knob to highlight theidentifier for the waypoint you wish to delete.Identifiers will appear in green text.3. Press CLR to display a confirmation window.4. With “Yes?” highlighted, press ENT to removethe selected procedure.The “Activate Leg?” provides a shortcut that allowsyou to specify which leg of the flight plan will cur-rently be used for navigation guidance, using thedirect-to key.To activate a specific leg of the active flight plan:1. Press the small right knob to activate thecursor and turn the large right knob to high-light the desired destination waypoint.
