11 - MESSAGESABBREVIATIONS &NAV TERMS188 190-00356-00 Rev GFlight Plan Transfer MessagesFPL imported successfully — The Flight Plan filecontained Route Points (that is, it didn’t contain only UserWaypoints) and there were no errors when importing themto the target position within the unit’s Flight Plan Catalog.WPT import successful - No FPL data was modi-fied — The Flight Plan file contained one or more UserWaypoints and there were no errors when adding them tothe User Database.Flight plan import failed — The unit failed to loadany information from the Flight Plan file. (Neither the FlightPlan Catalog nor the User Database was modified.)File contains wpts only — The Flight Plan file did notcontain any Route Points but one or more User Waypointswere imported successfully.FPL import message(s): — The Flight Plan file con-tained Route Points (it didn’t contain only Waypoints) andthere were some errors or warnings (see below). Some or allinformation was imported successfully.FPL too long, truncated (appended to the importresults text) — The Flight Plan file contained more RoutePoints than a flight plan can support.Invalid FPL wpt(s) locked (appended to the importresults text) — The Flight Plan file contained one or moreWaypoints that could not be found in the navigation data-base or imported into the User Database.User wpt database full - Not all waypoints loaded(appended to the import results text) — One or moreof the User Waypoints in the Flight Plan file were not cre-ated because the unit’s User Database is full (or became fullduring the import operation).User waypoint(s) renamed (appended to the importresults text) — One or more of the User Waypoints in theFlight Plan file was renamed during the import operation.Verify FPL before use (appended to the importresults text) — One or more of the User Waypoints orRoute Points to be imported were modified in some way(one or more of messages [f] through [i] were displayed) andchanges should be verified before using the flight plan fornavigation.
