6 - WPT PAGES126 190-00356-00 Rev GAfter selecting the Approach Channel, the WAASapproach ID will be shown in the top left corner ofthe map display.To select an approach channel from the AirportApproach Page:1. Press MENU to display the Airport ApproachPage Options.2. Turn the small or large right knob to highlight“Select Approach Chnl? and then press ENT.3. Turn the small right knob to change valuesand the large right knob to move the cursor.After selecting the WAAS approach channel,press ENT.4. Select the desired transition and press ENT.Select Next FPL Apt?As described earlier in this section.Select Destination Apt?As described earlier in this section.Airport Arrival PageThe airport arrival page shows the available AirportStandard Terminal Arrival (STAR) procedures forthe selected airport. Where multiple transitions orrunways are associated with the arrival procedure,that information may also be displayed. A map imageprovides a layout diagram for each arrival, transitionand runway.ArrivalProcedure NameAirport Identifier,Symbol and Type Map ImageFifth Pagein WPT groupTransitionsRunways Associatedwith ArrivalTo scroll through the available arrivals:1. Press the small right knob to activate thecursor.2. Turn the large right knob to place the cursoron the arrival procedure name field.3. Turn the small right knob to display a windowof available arrivals for the selected airport.Continue turning the small right knob toselect the desired arrival.Airport Arrivals
