9 - AUX PAGES166 190-00356-00 Rev GUtility PageTo record or reset the departure time:1. Select “Flight Timers” from the utility page.2. Turn the large right knob to highlight thereset mode field, under “Departure Time”.(The reset mode field will indicate “Pwr-on”or “GS>30kt”.)3. Turn the small right knob to select the desiredreset mode. (“Pwr-on” will record a departuretime when the 400W-series unit is turned on.“GS>30kt” will record a departure time oncethe GPS-computed ground speed exceeds 30knots.)In the case of a helicopter installation, theDeparture Criteria is “Pwr-on” or “In-air.”4. Press ENT when finished.5. To reset the departure time, turn the largeright knob to highlight “Reset?” and pressENT.To view, use or reset total trip time:1. Select “Flight Timers” from the utility page.2. Turn the large right knob to highlight thereset mode field, under “Total Trip Time”.(The reset mode field will indicate “Pwr-on”or “GS>30kt”.)3. Turn the small right knob to select thedesired reset mode. (“Pwr-on” will record triptime, in hours/minutes/seconds, any time the400W-series unit is turned on. “GS>30kt” willrecord trip time any time the GPS-computedground speed exceeds 30 knots.)In the case of a helicopter installation, the TotalTrip Criteria is “Pwr-on” or “In-air.”4. Press ENT when finished.5. To reset the total trip time, turn the large rightknob to highlight “Reset?” and press ENT.Trip StatisticsTo reset trip statistics readouts:1. Select “Trip Statistics” from the utility page.2. Press MENU to display an options windowwith several reset options:• Reset Trip?— Resets trip odometer and averageground speed readouts• Reset Max Speed?— Resets maximum speedreadout only
