Garmin GNS 400W Pilot's Manual & Reference

Also see for 400W Series: Supplemental Flight manual Pilot's guide addendum Manual supplement Pilot's guide addendum Quick reference guide

Contents

Garmin GNS 400W Pilot's Manual & Reference Manual pdf 183 page image

9 - AUX PAGES173190-00356-00 Rev GSetup 1Units / Mag VarTo set the magnetic variation:1. Select “Units / Mag Var” from the Setup 1page.2. The flashing cursor highlights the headingmode field. Turn the small right knob to selectthe desired heading mode: Magnetic, True, orUser. Press ENT to accept the selection.3. If User Heading is selected, the flashing cursorwill highlight the Heading field. Turn the smallright knob to the desired heading values,hemisphere and then degrees.NOTE: Manual (User) selection of the headingvalue is available for units with SW Version 3.30,or later.4. Press ENT to accept the selection.To change the units of measure:1. Select “Units / Mag Var” from the Setup 1page.2. Turn the large right knob to highlight thedesired units of measure category. The fol-lowing categories, and corresponding units ofmeasure, are available:• DIS, SPD—distance and speed in Nautical(nautical miles/knots), Statute (miles/milesper hour) or Metric (kilometers/kilometers perhour) terms.• ALT, VS—altitude and vertical speed in Feet/feet per minute, Meters/meters per minute, orMeters/meters per second.• PRESSURE—barometric setting in Inches orMillibars.• TEMP—temperature in degrees Celsius orFahrenheit.• FUEL—fuel units in Gallons, Imperial Gal-lons, Kilograms, Liters or Pounds.3. Turn the small right knob to select the desiredunits of measure for the selected category.Press ENT to accept the selection.