3 - DIRECT-TO62 190-00356-00 Rev GSelecting a WaypointSelecting a Direct-To Waypoint by FacilityName or CityIn addition to selecting a direct-to waypoint byidentifier, the select direct-to waypoint page also allowsyou to select airports, VORs and NDBs by facilityname or city location. If duplicate entries exist for theentered facility name or city, additional entries may beviewed by continuing to turn the small right knobduring the selection process.FacilityNameIdentifier, Symboland Region Flight PlanFieldCityNearestAirportFieldTo select a direct-to waypoint by facility name orcity:1. Press the direct-to key. The select direct-towaypoint page will appear, with the waypointidentifier field highlighted.2. Turn the large right knob to highlight thefacility name (second line; see above) or thecity (third line; see above) field.3. Use the small and large right knobs to enterthe facility name or city location of the desireddirect-to waypoint. As you spell the facilityname or city, the Spell’N’Find feature will selectthe first entry in the database based upon thecharacters you have entered up to that point.4. Continue turning the small right knob toscroll through any additional database listingsfor the selected facility name or city. You canalso scroll backwards with the small rightknob if you scroll past the desired waypoint.5. Press ENT to confirm the selected waypoint,and ENT to activate the direct-to function.To select the direct-to waypoint by facilityname (shown above) or city location (shownbelow), highlight the second or third line onthe direct-to waypoint page. Use the small andlarge right knobs to enter the facility name orcity. The identifier(s) for any matching entrieswill appear on the top line of the page.
