9 - AUX PAGES158 190-00356-00 Rev GFlight Planning4. Turn the large right knob to highlight thedeparture time (DEP TIME) field.5. Use the small and large right knobs to enterthe departure time. Press ENT when finished.(Departure time may be entered in local or UTCtime, depending upon unit settings.)6. The flashing cursor moves to the ground speed(GS) field. Use the small and large rightknobs to enter the ground speed. Press ENTwhen finished.7. With all variables entered, the following infor-mation will be provided:• DTK— Desired track, or desired course• DIS— Distance• ETE— Estimated time en route• ESA— En route safe altitude• ETA— Estimated time of arrivalDensity Alt / TAS / WindsTo calculate density altitude, true airspeed, windsaloft:1. Select “Density Alt / TAS / Winds” from theflight planning page.2. The flashing cursor highlights the indicated alti-tude (IND ALT) field. Use the small and largeright knobs to enter the altitude indicated onyour altimeter. Press ENT when finished.3. The flashing cursor moves to the calibratedairspeed (CAS) field. Use the small and largeright knobs to enter the airspeed from yourairspeed indicator. Press ENT when finished.4. The flashing cursor moves to the barometricsetting (BARO) field. Use the small and largeright knobs to enter the barometric setting(altimeter setting). Press ENT when finished.5. The flashing cursor moves to the total air tem-perature (TAT) field. Use the small and largeright knobs to enter the temperature. PressENT when finished.
