2) Fit the binding screw w (M4) in the screw hole of the pulley shaft, and fix the No. 2mirror mount in place on the side plate.Figure 3-5193) Engage the scanner cable on the pulley and the hook as shown in the figure.Figure 3-5204) Remove the screw fitted in step 2).CHAPTER 3 EXPOSURE SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 3-27wotreqywui3mm=0~Put the steelball into thehole of thepulley.Wind it eighttimes.Fix temporarily.