Reference:The distance over which the scanner moves (maximum) from the leading edge ofan original (10mm/0.4” forward from the falling edge of PS1) is 432mm/17”; further,the distance is limited in relation to the selected reproduction ratio. In the case of200% enlargement, the scanner may move up to 216mm/8.5”.Reference:If more than two modes are selected, the scanner is controlled based on thesmallest original size identified.If any of the following modes is selected, the scanner is controlled based on theoriginal size.Table 3-3023-12CHAPTER 3 EXPOSURE SYSTEMCOPYRIGHT © 1997 CANON INC. CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)ModeWith feeder (RDF/ADF) in useOriginal frame erase modeOriginal size used as referenceOriginal size detected by feederOriginal size set by user
