Xerox WorkCentre 5687 Series Service Manual

Contents

Xerox WorkCentre 5687 Series Service Manual Manual pdf 408 page image

August 20072-216 WorkCentre 5687 Family08-150B, 08-151B, 08-155, 08-156Status Indicator RAPsFigure 2 Circuit diagram08-155, 08-156 Bypass Tray Registration Jam Entry RAP08-155 The lead edge of the paper failed to actuate the registration sensor within the correcttime after start of feed from the bypass tray.08-156 The IOT detects that a sheet fed from the bypass has arrived to early at the registrationsensor.ProcedureIdentify the speed of the machine, refer to SCP 7 Machine features. Perform one of the stepsthat follow:• If the speed of the machine is 32-55 ppm, go to 08-155A, 08-156A Bypass Tray Registra-tion Jam RAP (32-55 ppm)• If the speed of the machine is 65-87 ppm, go to 08-155B, 08-156B Bypass Tray Registra-tion Jam RAP (65-87 ppm).